Packaging:
Packaged in 3.75 litre units, 4 units per carton. Each container is clearly marked with product name, component designation (‘A’ or ‘B’),
manufacturers name, batch number and ratio of component mixtures. Both containers of ‘A’ and ‘B’ are colour coded the same.

Coverage:
Primer: 8 mils 5 m2/litre (205 ft2/gal.) on normal surfaces
Topcoat: 8 mils 5 m2/litre (205 ft2/gal.) on normal surfaces

The average total target film build is 16 mils (0.016″ or 0.4 mm)

ACTUAL COVERAGE WILL VARY DEPENDING ON THE POROSITY AND COMPOSITION OF THE SUBSTRATE(S). A TEST SAMPLE SHOULD BE APPLIED TO ESTABLISH PRACTICAL COVERAGE ON THE ACTUAL SUBSTRATE.

Appliction:
Brush, roller or spray

Abrasion Resistant Wall & Floor Epoxy Coating

Product Description:
DUREX DUR-A-HARD HPC is a 100% solids epoxy with excellent all around application properties. It provides high and early abrasion resistance and good chemical resistance. With no solvent present in the formula it is V.O.C. compliant with extremely low odour level during installation.

Uses:
DUREX DUR-A-HARD HPC, applied in two coats at 16 mils total build, provides outstanding durability, easy maintenance and 3 – 5 times the life expectancy of conventional coatings. It is an excellent wall or floor coating providing excellent value.

  Download More Information
 
 

 

 
HTML Editor - Full Version

©2014 Copyright Durabond Products Limited All Rights Reserved Privacy Policy & Terms of Use

Mississauga Office: 6178 Netherhart Road Mississauga, Ontario, Canada L5T 1B7

Western Canada Office: 14345 120th Avenue Edmonton, Alberta, Canada T5L 2R8

Phone: (416) 759-4474 E-mail: info@durabond.com