Packaging:
DUREX COLOURTEX PRIMER is packaged in 18.9 litre pails.

DUREX COLOURTEX PRIMER is readily available in an assortment of standard
colour schemes. Please refer to our Durex Architectural Coatings Colour
Selection Guide for more information. Custom colour matching is available
upon request at a slight additional charge.

Coverage:
Coverage will vary according to the porosity of the substrate, colour of
original substrate and colour of the DUREX COLOURTEX PRIMER to be applied.

Average coverage: 65-74.3 m²/pail
(700-800 ft²/pail)

A TEST SAMPLE SHOULD BE APPLIED TO ESTABLISH PRACTICAL
COVERAGE ON THE ACTUAL SUBSTRATE.

Application:
DO NOT SUBSTITUTE NOR COMPENSATE DUREX COLOURTEX PRIMER WITH WATER OR
OTHER ADDITIVES.

Substrate to be treated must be dry, clean and sound, free of weak and
powdery surfaces, free from ice, snow, dew and frost, oil, grease and
other deleterious materials detrimental to a positive bond.

Check with Durabond Products Limited for questionable surfaces. Thoroughly
stir DUREX COLOURTEX PRIMER in its’ own pail before each use. Discard all
frozen materials, materials which have formed solid lumps at the bottom of
the container and materials which do not appear to be of a homogeneous
viscosity.

Using a 6.4 mm (1/4″) pile roller dip roller into stirred pail of
material. Apply the coating with several passes of the roller, evenly
spreading the paint over the entire substrate surface.

Allow a minimum of 24 hours for drying between coats.


Acrylic High Build Protective & Decorative Coating

Product Description:
DUREX COLOURTEX PRIMER is a 100% flat acrylic based coloured
coating used primarily as the primer for all Durex Architectural Coatings.

Uses:
DUREX COLOURTEX PRIMER is used as a premium quality primer for
exterior masonry and concrete surfaces and is the primary primer for all
Durex Architectural Coatings.

DUREX COLOURTEX PRIMER can be pigmented
to match almost any colour.

Advantages:

  • Exceptional exterior durability
  • Excellent water repellency; protects wall from
    moisture penetration
  • Breathable coating; allows water vapour within
    the wall system to evaporate
  • Excellent adhesion to substrates
  • Abrasion resistant
  • Colourfast (no colour change under
    ultra-violet ray
  Download More Information
 
 

 

 
HTML Editor - Full Version

©2014 Copyright Durabond Products Limited All Rights Reserved Privacy Policy & Terms of Use

Mississauga Office: 6178 Netherhart Road Mississauga, Ontario, Canada L5T 1B7

Western Canada Office: 14345 120th Avenue Edmonton, Alberta, Canada T5L 2R8

Phone: (416) 759-4474 E-mail: info@durabond.com