Packaged in 22.5 litre pails (5 gal.).

DUR-A-SEAL A50 should be applied in two coats. Typical spreading rates are as follows:

Smooth dense concrete:
3.7 – 4.5 m2/litre (151 – 183 ft2/gal.)

Gunite surfaces ,porous block or brick:
1.7 – 3.1 m2/litre (69 – 126 ft2/gal.)

Brushes, rollers, or spray

Pigmented Acrylic Concrete & Masonry Coating

Product Description:
DUR-A-SEAL A50 is a pigmented one component acrylic copolymer based on methacrylate resins.

DUR-A-SEAL A50 effectively seals brick, block and concrete against the ingress of water. It also has superior chloride screening capabilities which make it ideally suited to protect all but the high traffic areas of concrete structures such as parking garages and bridges. Pigmented coatings are extremely resistant to weathering effects.

DUR-A-SEAL A50 provides durable protection of concrete balconies, exterior walls, exterior of water towers and any concrete or masonry structure where uniform colour and easy clean surfaces are required. DUR-A-SEAL A50 will allow the structure to breathe, a feature which is essential on heated buildings and on structures in contact with earth or water. It can be readily re-coated, after cleaning, should damage occur.

  Download More Information


HTML Editor - Full Version

©2014 Copyright Durabond Products Limited All Rights Reserved Privacy Policy & Terms of Use

Mississauga Office: 6178 Netherhart Road Mississauga, Ontario, Canada L5T 1B7

Western Canada Office: 14345 120th Avenue Edmonton, Alberta, Canada T5L 2R8

Phone: (416) 759-4474 E-mail: