DUREX EMC is packaged in 25 kg pails. DUREX EMC is available in 28 standard colours. Custom colour matching is available upon request at a slight additional charge.

6.15 m2/L (250 ft2/gal.) first coat 6.15 m2/L (250 ft2/gal.) second coat

(Allow 500 ft2/pail for two coats)
Coverage rate will vary according to the porosity and roughness of the surface being coated. Very rough or porous surfaces may require more than 2 coats to provide the required minimum 10 mils dry film thickness


Acrylic Elastomeric High Build Protective &
Decorative Coating

Product Description:
DUREX EMC is a 100% acrylic based elastomeric high build protective wall coating. Its’ unique formulation permits bridging of minor cracks which can normally appear in walls. A breathable coating, the DUREX EMC provides an effective weather shield for wall surfaces.

DUREX EMC can be applied over almost any solid substrate including but not limited to, the following:

  • Clean concrete and masonry and all other types of cementitious substrates
  • Over solid clean substrates, including stucco with cracks not greater than 1.6 mm (1/16″) wide
  • Exterior and interior surfaces
  • Stone, precast, exposed aggregate surfaces


  • High flexibility; up to 300% elongation with100% recovery
  • Retains flexibility at low temperatures to -40C
  • Low dirt pick up (wall remains cleaner even in high pollution areas)
  • Easy to apply
  • Ready-mixed; economical
  • Excellent adhesion to cementitious substrates
  • Permeable; allows wall to breathe and trapped water vapour in wall to evaporate
  • Long term weatherability
  • Excellent resistance to ultraviolet rays
  • Colourfast
  • Permanently bridges existing minor cracks

  Download More Information


HTML Editor - Full Version

©2014 Copyright Durabond Products Limited All Rights Reserved Privacy Policy & Terms of Use

Mississauga Office: 6178 Netherhart Road Mississauga, Ontario, Canada L5T 1B7

Western Canada Office: 14345 120th Avenue Edmonton, Alberta, Canada T5L 2R8

Phone: (416) 759-4474 E-mail: