Elastomeric EMC Protective Wall Coating System
Elastomeric Coatings
Elastomeric EMC Protective Wall Coating System
Acrylic Elastomeric High Build Protective & Decorative Coating
View Project Gallery
System Description
Components
Documentation
Description

EMC is a 100% acrylic-based elastomeric high build protective wall coating. Its unique formulation permits bridging of minor cracks which can normally appear in walls. A breathable coating, the EMC provides an effective weather shield for wall surfaces.
Advantages
  • High flexibility; up to 300% elongation with 100% recovery
  • Retains flexibility at low temperatures to -40°C
  • Low dirt pick-up (wall remains cleaner even in high pollution areas)
  • Easy to apply
  • Ready-mixed; economical
  • Excellent adhesion to cementitious substrates
  • Permeable; allows wall to breathe and trapped water vapour in wall to evaporate
  • Long-term weatherability
  • Excellent resistance to ultraviolet rays
  • Colourfast
  • Permanently bridges existing minor cracks

 

Uses

EMC can be applied over almost any solid substrate including but not limited to the following:

  • Clean concrete and masonry and all other types of cementitious substrates
  • Over solid clean substrates, including stucco with cracks not greater than 1.6 mm (1/16") wide
  • Exterior and interior surfaces
  • Stone, precast, exposed aggregate surfaces
Elastomeric EMC Protective Wall Coating System Data Sheet
System Layer Optional Products Per Layer Notes
Primer
Intermediate Coat
Top Coat