Durex® Durathane B220 Elastomeric Urethane Balcony Coating System is a two-component, self-priming, high solids elastomeric aliphatic urethane coating designed as a tough, one-coat protective coating for pedestrian traffic areas such as balconies and walkways. Durex ® Durathane B220 is a quick application system and features revolutionary self- priming, and high adhesion technology for a one-coat application.
- Elastomeric coating engineered specifically for balconies
- Easy, quick one-step application
- Elastomeric and crack-bridging properties
- Low odour
- Aliphatic urethane, outstanding UV resistance
- Abrasion resistant
- Pre-blended rubber aggregates are available
- Durable slip-resistant surface
- Self-Priming, tenacious adhesion to concrete substrates, primer usually not required
Durex ® Durathane B220 is a liquid-applied, UV-stable, elastomeric single-application pedestrian coating system. Durex ® Durathane B220 is formulated as a self-priming coating with excellent substrate adhesion. It is an elastomeric coating with minor crack bridging and can be broadcasted with silica sand for non-slip functionality.
| Colour | Please see Durex® Colour Selection Guide for available colour options. |
|
| Resin Type | Aliphatic polyurethane |
|
| Coverage | 130 ft2/gal @ 12 mils DFT |
|
| Mix Ratio | 2 Component Kit – Mix as supplied |
|
| Cure Time | @ 23°C (75°F) |
|
| Pot Life | 60-75 minutes |
|
| VOC | 10 g/L |
| Percent Solids | 100% |
||
| Bond Strength | ASTM D4541 |
350 psi |
|
| Tear Strength | ASTM D624 Die C |
350 psi (2.5 MPa) |
|
| Tensile Modulus | ASTM D638-86 |
1450 psi (10.1 MPa) @ 23oC |
|
| Elongation | ASTM D638-86 |
380 % |
|
| Low Temperature Flexibility | 1/8” Mandrel @ -26oC |
Pass |
|
| Abrasion Resistance | ASTMD 5178-91 |
75 mg |
|
| Static Coefficient of Friction | ASTM C1208 |
Dry: 0.80 (with anti-slip aggregates) |
|
| Water Vapour Transmission | ASTM E96 |
1.62 perms (91.5g/s/m2) |
|
| Shore A Hardness | 95 |
| System Layer | Optional Products Per Layer | Notes |
|---|