Komfort - REG
Seamless, Ergonomic Polyurethane Floor System (3mm)
Description

Durex® Komfort REG is a seamless, 3mm thick, polyurethane-based ergonomic comfort floor system that features a stand-alone 3mm wear-resistant layer for enhanced durability and point load resistance. Durex® Komfort REG is a durable, abrasion-resistant floor that is easy to overcoat. Durex® Komfort REG is engineered for use in high-traffic institutional and commercial areas such as healthcare environments, hospitals, and residential and office areas.   

Advantages
  • Ergonomic and Seamless
  • Available in a multitude of colours and decorative finishes (DecoArt)
  • High performance, aesthetically pleasing, durable finish
  • Easy and quick to install
  • Long-term service life
  • Easy to recoat and repair
  • Lightweight seamless flooring system, easily upturned to create curbs and containment areas
  • Will not support the growth of fungus or bacteria
  • Excellent abrasion and slip resistance
  • Easy to clean and maintain
  • CFIA approved and USDA accepted
Uses

Durex® Komfort REG System is used as a decorative and protective ergonomic flooring system for dry areas that will be exposed to higher traffic where sound absorption is not as critical. It is best used for institutional, commercial, and retail flooring applications where a seamless flooring system is required.

• Laboratories
• Hospital Main Corridors (dry areas)
• Retail, Office and Commercial Applications
• Recreational facilities
• Public institutions and buildings

Physical Properties
Colour

Standard Finish: Solid Colour.

DecoArt Finish: Variety of Designs & Colours

Coverage
  • Durex® Komfot Primer
  • Durex® Komfot Self-Leveling
  • Durex® Komfort Top Coat
  • 5 m2 /L (200 ft2 /gal) @ 8 mils
  • Durex® Komfort Self Leveling (or Durex® Komfort DecoArt: 3.0kg/m2 (45 ft2 /kit) @ 3mm (120 mils)
  • 0.1 kg/m2 (400 ft2 /gal) @ 3 mils WFT (2 coats required)
Mix Ratio

Refer to Product TDS Sheet

Pot Life

Refer to Product TDS Sheet

Chemical Resistance

Contact Durabond for specific information

Performance Properties
Percent Solids

ASTM D7232-06

100%

Shore Hardness A

ASTM D2240

83

Sound Dampening

4 db

Suitable for Underfloor Heating

Yes

Abrasion Resistance

ASTM D4060

(-0.04g) C5-17/1000 rotations/ 1000g

Impact Strength

ASTM D4226

167 in./lbs

Residual Impression

ASTM D4226

0.05mm (360kg load)

Tensile Strength

ASTM F970

1,454 psi. (~ 10.0 N/mm²

Tensile Adhesion Strength

ASTM D4541

> 500 psi. (3.5 MPa) (concrete failure)

Tear Strength

ASTM D624

153.36 lb./in. (~ 27 N/mm 14 days)

Elongation at Break

ASTM D412

195%

Crack Bridging Ability

ASTM C1305

Passed

External Fire Performance

ASTM E648

Class I

Gloss Level

ASTM D-523

10 (60 Degree)

Coefficient of Friction

ANSI 326.3

0.6

System Layer Optional Products Per Layer Notes
Primer
Intermediate Coat
Top Coat