7.8 m2/L (320 ft2/US gal) @ 5 mils DFT
Dur-A-Comfort Primer 100% Solids Urethane Flooring Primer is a two-component, polyurethane-based flooring primer. It is specially formulated to perform where substrate penetration and superior adhesion is required.
- Excellent adhesion to a variety of substrates
- Good physical properties
- Outstanding stability at low temperatures
- Zero VOCs, 100% solid urethane
- Excellent moisture resistance
- High-build capability (up to 400 microns, 16 mils)
- Smooth, bubble-free film surface
- Superior substrate penetration; seals the surface
- CFIA approved
Dur-A-Comfort Primer is used to seal and prime concrete and wood substrates to be top-coated with various coatings systems. Dur-A-Comfort Primer is mainly used as a primer for Dur-A-Comfort Ergonomic Flooring Systems and other related coatings to assist in the reduction of out-gassing and to achieve ultimate adhesion. Dur-A-Comfort Primer performs as a protective primer for comfort flooring (ergonomic) related applications. Must be top-coated, unless indicated otherwise.
| Colour | Clear - Amber | |
| Resin Type | Aromatic urethane – Hybrid Polyol | |
| Mix Ratio Part A (Resin):Part B (Urethane) | As supplied in kit | |
| Cure Time @ 5-23°C |
| |
| Coverage | 7.8 m2/L (320 ft2/US gal) @ 5 mils DFT | |
| Recommended Film Thickness | 5 mils (75 µ) | |
| Pot Life @ 23°C (75°F) | 35-45 minutes | |
| Reducer/Clean-Up | Lacquer thinner or IPA | |
| V.O.C. | Zero |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232-06 | 100% |
| Viscosity (Brookfield) 23°C (75°F) A+B | ASTM D2196 | 700-800 cps |
| Abrasion Resistance | ASTM D5178-91, CS-17 wheel | 35 mg, 1000 g load, 1000 cycles |
| Tensile Modulus | ASTM D638-86 | 2,400 psi |
| Elongation | ASTM D638-86 | 45% |
| Specific Gravity | ASTM D333 |
|
| Flexural Modulus | ASTM D790-86 | 47,000 psi |
