Dur-A-Quartz Decorative Quartz Broadcast System is a high build, heavy duty, decorative, multi-coloured fine aggregate epoxy flooring system that is top coated with a clear protective sealer, designed to protect concrete floors from heavy wear, impact, abrasion and mild chemicals while yielding an aesthetically pleasing finish. Installed at 80-120 mils (2-3 mm), the Dur-A-Quartz Decorative Quartz Broadcast System offers excellent abrasion resistance for demanding floor areas.
- High performance, aesthetically pleasing, durable finish
- Easy and quick to install
- Long term service life
- Thin, lightweight seamless flooring system, easily upturned to create curbs and containment areas
- 100% solids, zero VOC
- Will not support growth of fungus or bacteria
- Excellent abrasion and slip resistance
- Easy to clean and to maintain
- CFIA approved and USDA accepted
Dur-A-Quartz Decorative Broadcast System is used as decorative and protective epoxy flooring system for areas that will be exposed to high traffic, heavy mechanical abuse and mild chemical attack. It is best used for institutional, commercial, and higher-end industrial flooring applications where high abrasion resistance and durability is required. Dur-A-Quartz Decorative Quartz Broadcast System is ideal for showers, locker rooms and wash-down areas, commercial areas, grocery stores, laboratories, hallways, recreational facilities, public institutions and buildings and offices.
| Colour | Please see Durex® Dur-A-Quartz Colour Selector for available colour options. |
|
| Coverage | Primer: (Durex® Epotel Multi-Prime) Decorative Quartz Broadcast: (Durex® Epotel GSC Clear + Durex® Decorative Quartz Aggregate)
Top Coat: (Durex® Epotel GSC Clear) |
5 m2/L (200 ft2/gal) @ 8 mils - Epotel GSC Clear: 0.9 m2/L (54 ft2/gal) @ 30 mils - Decorative Quartz: Full saturation to excess broadcast + 7.4 kg/m2 (1.5 lb/ft2) 2-3 m2/L (80-160 ft2/gal) @ 10-20 mils WFT |
| Mix Ratio | 2:1 by volume |
|
| Pot Life | 25 minutes (Epotel GSC) |
|
| Service Temperature Range | Minimum: 0°C/Maximum: 50°C/Quick Term: 95°C |
| Percent Solids | ASTM D7232-06 |
100% |
|
| Viscosity (Brookfield) 23°C | ASTM D2196 |
800 cps (clear) |
|
| Specific Gravity | ASTM D333 |
1.07 (Clear) |
|
| Compressive Strength | ASTM 695-85 |
14, 200 psi (98 MPa) |
|
| Tensile Strength | ASTM 695-85 |
10,000 psi (69 MPa) |
|
| Bond Strength | ASTM C1583 |
520 PSI (3.6 MPa) |
|
| Elongation | ASTM D638-86 |
8.0% |
|
| Flexural Strength | ASTM D790-86 |
16,100 psi (111 MPa) |
|
| Abrasion Resistance | ASTM D4060-90 |
0.033 |
| System Layer | Optional Products Per Layer | Notes |
|---|---|---|
| Primer | Optional Optional Optional Optional |
|
| Intermediate Coat | + Dur-A-Quartz Broadcast Aggregate |
|
| Top Coat | ||
| Polyurethane Top Coat | Optional Optional Optional |