4.5kg/ m2 @ 3mm thick
Dur-A-Comfort Self Leveling is a two-component, solvent-free, high solids elastomeric polyurethane self-leveling body coat specially formulated for comfort flooring surfaces. It is designed to work in conjunction with Dur-A-Comfort Membrane or as a direct applied coating for the Dur-A-Comfort ergonomic series of flooring systems.
- Resilient self-leveling coating
- Seamless
- Elastomeric
- Anti-Microbial
- Does not harbour bacteria growth
- Outstanding water impermeability sealing properties
- Very low odour and zero VOCs
- Potential LEED credits
- Excellent water immersion properties
- Non-Shrinking
Dur-A-Comfort Self Leveling is used as a resilient, self-leveling body coat for comfort floor systems. It can be applied overtop of Dur-A-Comfort Membrane or as a direct applied coating depending on the specified comfort floor system. To be top-coated with Polyuretel VOC or Acrutel 100 for sheen control and ultimate abrasion resistance.
| Colour | Please see Durex® Colour Selection Guide for available colour options. | |
| Resin Type | Polyurethane | |
| Mix Ratio | As Supplied in Kit (Part A & B) | |
| Cure Time @ 35-40°C |
| |
| Pot Life @ 23°C | 25 minutes | |
| Coverage | 4.5kg/ m2 @ 3mm thick | |
| Recommended Film Thickness | 2-4mm thick (depending on thickness) | |
| Recycled Content | 53% |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232-06 | 100% |
| V.O.C. | ASTM D3960 | 0 g/L |
| Specific Gravity | ASTM D333 | 1.25 ± 0.05 g/L |
| Viscosity | ASTM D2196 | 4500 cps |
| Abrasion Resistance | ASTM D5178-91, CS-17 wheel | 11 mg loss, 1000 g load, 1000 cycles |
| Tensile Strength | ASTM D412 | 2,200 psi |
| Tear Growth Strength | ISO 34-1 | 25N/mm |
| Elongation | ASTM D412 | 2 mm film passes 12 mm mandrel |
| Shore Hardness (A) | ASTM D2240 | 80 |
