Durex Duracrete RGL Trowel System is an extremely durable, single colour, trowel applied industrial floor overlay with recycled glass designed to restore damage concrete or protect new concrete from high impact, abrasion, wear and mild chemicals in institutional, commercial and industrial environments. Durex Duracrete Trowel System consists of a tough silica sand mixture embedded in a 100% solids epoxy resin, which is finished to provide an extremely durable, extra heavy-duty flooring system.
- Featuring Recycled Glass (up to 25%)
- Extremely durable, highly abrasion resistant
- Seamless
- 100% solids, VOC free resins
- Proprietary, tightly packed, easy to apply sand + glass mixture
- Can be hand or power troweled
- Will not support growth of fungus or bacteria
- Easy to clean and to maintain
- CFIA approved, USDA accepted
Durex Duracrete RGL Trowel System is used to protect new concrete which will be exposed to mechanical and chemical abuse, or to resurface, level, pitch or slope existing floor slabs in industrial applications while using recycled materials. Chemical resistance and UV resistance can be attained by applying customizable top coats.
| Colour | Please see Durex Colour Selection Guide for available colour options. |
|
| Resin Type |
|
|
| Ratio | Durex Epotel TL - 2:1 by Volume |
|
| Pot Life @ 23°C | Durex Epotel TL + RGL Aggregate - 20 minutes |
|
| Service Temperature Range | Min. 0°C/Max. 50°C/Quick Term 95°C |
| Compressive Strength @ 7 days | ASTM C 579 |
9.800 psi |
|
| Tensile Strength | ASTM C 307 |
1,700 psi |
|
| Flexural Strength | ASTM C 580 |
3,900 psi |
|
| Flexural Modulus of Elasticity | ASTM C-580 |
2.1 x 106 psi |
|
| Bond Strength | ASTM D4541 |
400 psi concrete fails |
|
| Thermal Coefficient of Expansion | ASTM D696 |
0.00006 mm/mm per 0°C (0.000025 in./in) |
|
| Coefficient of Friction | ANSI A137.1 / ANSI A326.3 |
0.73 WET |
|
| Abrasion Resistance CS-17 wheel, 1 kg. load, 1000 rev. | ASTM D 4060 |
35-45 mg maximum weight loss |
|
| Thermal Shock Resistance | ASTM C 884 |
Passes |
|
| Water Absorption | ASTM C 413 |
0.15% |
|
| Flammability | ASTM D 635 |
Class 1 |
|
| Impact Resistance | MIL D-3134F |
+160 in/lbs concrete fractures |
|
| Hardness | ASTM D-2240, Shore D |
85 |
|
| Indentation | MIL D-3134F |
No indentation |
| System Layer | Optional Products Per Layer | Notes |
|---|