20/ft² (1.86/m²) per Gallon @ 80.00 mils (2.0320 mm)
Dur-A-Fast Membrane is a polyurethane modified methyl methacrylate membrane to be used in conjunction with Dur-A-Fast Traffic Bearing Waterproofing Systems. Dur-A-Fast Waterproofing Systems are a series of rapid return to service, high performance, UV resistant decorative and functional traffic bearing waterproofing systems. Dur-A-Fast Membrane is a rapid curing, highly elastomeric membrane which waterproofs the surface and creates a crack bridging, impermeable layer to protect the substrate. It is designed to be ready to top coat within 45 minutes of application.
- Polyurethane modified Methyl Methacrylate based technology
- Extremely rapid curing, ready for topcoat within 45 minutes (depending on temperature).
- Cold curing capability, cures down to -20°C
- Outstanding water impermeability sealing properties
- Excellent water immersion properties
- High chemical resistance to acids, alkalis, salts, seawater, sewage and other compounds
- Fast curing properties
- Excellent low temperature flexiblity and crack bridging properties.
Dur-A-Fast Membrane is used as a waterproofing membrane for all Dur-A-Fast Traffic Bearing Waterproofing Systems to waterproof the substrate and provide crack bridging capabilities. It will protect the substrate intrusion from water, chloride ion, salt and damage from chemicals. Dur-A-Fast Membrane can be used in virtually all seasons, as it can be applied down to -20oC. Dur-A-Fast Membrane is also used for balcony terraces and pedestrian walkways, parking decks, mechanical rooms, plaza, pools, recreationals decks, vehicular ramps and stadiums.
| Colour | Off White | |
| Resin Type | Polyurethane Modified Methyl Methacrylate | |
| Mix Ratio | Part A (resin):Part B (catalyst) | |
| Cure Time @ 23°C |
| |
| Pot Life @ 23°C | 15 -20 minutes | |
| Coverage | 0.98 m²/L (40 ft²/gal) @ 1.25mm (80 mils) *varies on system* |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232 | 100% |
| V.O.C. & Absorption | ASTM D3960 | 0 g/L |
| Specific Gravity | ASTM D333 | 1.19 · 0.05 g/L |
| Mixed Viscosity | ASTM D2196 | 1000 cps |
| Abrasion Resistant | ASTM 5178-91, CS-17 wheel | 75 mg, 1000 g load, 1000 cycles |
| Tensile Strength | ASTM D638 | 920 psi |
| Tear Strength | ASTM D624 Die C | 89 lbf |
| Elongation | ASTM D638 | 520% |
| Low Temperature Flexibility | 1/8" Mandrel @ 26°C | Pass |
| Water Absorption | ASTM D570 | < 0.1% |
| Shore D Hardness | ASTM D2240 | 80 |
| Pull-Off Strength of Coatings | ASTM D4541 | 3.35 MPa (480 psi) over primed concrete surface |
| Water Vapour Transmission | ASTM E96 · Procedure B |
|
| Water Vapour Permeability | ASTM E96 |
|
| Water Vapour Performance | ASTM E96 |
|
