75 SF / Gal @ 20 mils DFT
Uraflex 361 Elastomeric Polyurethane Traffic Bearing Topcoat is a two-component, solvent-free, high solids elastomeric polyurethane topcoat specially formulated for traffic bearing surfaces. It is designed to adhere to Uraflex 360 Elastomeric Polyurethane Waterproofing Membrane and other similar membranes to form a highly effective traffic bearing waterproofing system.
- Resilient coating with high abrasion resistance.
- Outstanding water impermeability sealing properties.
- Very low odour and zero VOCs.
- Potential LEED credits.
- Excellent water immersion properties.
- Self-cleaning, fast curing, and easy to apply and to maintain.
- Superior abrasion and scratch resistance; high tensile strength.
Uraflex 361 Elastomeric Polyurethane Traffic Bearing Topcoat is used as a resilient topcoat for traffic bearing waterproofing systems. It can be recoated for additional wear resistance. Anti-slip performance is achieved by broadcasting silica sand or aluminum oxide grit into the coating. Uraflex 361 is ideal for: Parking Decks, Balcony terraces and pedestrian walkways, Mechanical rooms, Plaza, pool and recreational decks, and vehicular ramps, Stadiums, as well as Non-potable water retention tanks, cooling towers and secondary containment
| Colour | Please see Durex® Colour Selection Guide for available colour options. | |
| Resin Type | Polyurethane | |
| Mix Ratio | Part A (resin):Part B (urethane) | |
| Cure Time @ 23°C |
| |
| Pot Life | 25 minutes @ 23°C | |
| Coverage | 64 ft²/gal @ 25 mils DFT | |
| Recommended Film Thickness | 18 - 25 mils DFT | |
| Recycled Content | 60% |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232 | 100% |
| V.O.C. | ASTM D3960 | 0 g/L |
| Specific Gravity | ASTM D333 | 1.25 ± 0.05 g/L |
| Viscosity | ASTM D2196 | 1500 cps |
| Abrasion Resistance | ASTM 5178 | 24 mg loss, 1000 g load, 1000 cycles |
| Tensile Strength | ASTM D412 | 3,000 psi |
| Elongation | ASTM D412 | 60% |
| Water Absorption | ASTM D570 | < 0.5% |
| Water Vapour Transmission | ASTM E96 | 0.29 metric perm |
| Shore Hardness A/D | ASTM D2240 | 95 / 70 |
| Chemical Resistance | ASTM D543 |
|
