106/ft² (9.85/m²) per Gallon @ 15.00 mils (0.3810 mm)
Dur-A-Fast Sealcoat is a polyurethane modified methyl methacrylate pigmented topcoat to be used in conjunction with Dur-A-Fast Traffic Bearing Waterproofing Systems. Dur-A-Fast Waterproofing Systems are a series of rapid return to service, high performance, UV resistant decorative and functional traffic bearing waterproofing systems. Dur-A-Fast Sealcoat is a rapid curing, abrasion resistant, UV resistant coating that protects the surface and creates a tough, impermeable layer to protect the membrane, substrate or previous layers. It is designed to be ready for light traffic within 45 minutes of application.
- Polyurethane modified Methyl Methacrylate based technology
- Extremely rapid curing, ready for light traffic within 45 minutes (depending on temperature).
- Cold curing capability, cures down to -20oC
- Outstanding water impermeability sealing properties
- Excellent water immersion properties
- High chemical resistance to acids, alkalis, salts, seawater, sewage and other compounds
- Fast curing properties
- Abrasion resistant, tough product
- UV Resistant
Dur-A-Fast Sealcoat is used as a top coat for all Dur-A-Fast Traffic Bearing Waterproofing Systems to seal and protect. Dur-A-Fast Sealcoat can be used in virtually all seasons, as it can be applied down to -20oC. Dur-A-Fast Sealcoat is also used for balcony terraces and pedestrian walkways, parking decks, mechanical rooms, plaza, pool and recreational decks, vehicular ramps and stadiums.
| Colour | Pigmented | |
| Resin Type | Polyurethane Modified Methyl Methacrylate | |
| Mix Ratio | Part A (resin): Part B (Catalyst) | |
| Cure Time @ 23°C |
| |
| Pot Life @ 23°C | 10 minutes | |
| Coverage | 14 m²/L (106 ft²/gal) @ 15 mils *varies on system* |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232 | 100% |
| V.O.C. & Absorption | ASTM D3960 | 0 g/L |
| Specific Gravity | ASTM D333 | 1.01 ± 0.05 g/L |
| Mixed Viscosity | ASTM D2196 | 1000 cps |
| Abrasion Resistance | ASTM 5178-91, CS-17 wheel | 45 mg, 1000 g load, 1000 cycles |
| Tensile Strength | ASTM D 638-86 | 1,800 psi |
| Tear Strength | ASTM D624 Die C | 250 lbf |
| Elongation | ASTM D638 | 30% |
| Water Absorption | ASTM D570 | <0.1% |
| Shore D Hardness | ASTM D2240 | 60 |
| Pull-Off Strength of Coatings | ASTM D4541 | 3.35 MPa (480 psi) over concrete surface |
| Water Vapour Transmission | ASTM E 96 - Procedure B |
|
| Water Vapour Permeability | ASTM E 96 |
|
| Water Vapour Permeance | ASTM E96 |
|
