150/ft² (13.93/m²) per Gallon @ 10.00 mils (0.2540 mm)
Dur-A-Fast Primer is a polyurethane modified methyl methacrylate primer to be used in conjunction with all Dur-A-Fast systems. Dur-A-Fast systems are a series of rapid return to service, high performance, UV resistant flooring systems. Dur-A-Fast Primer is a rapid curing, penetrating primer which helps seal the surface and create a positive, lasting bond to the substrate. It is designed to be ready to top coat within 45 minutes of application.
- Polyurethane modified Methyl Methacrylate based technology
- Extremely rapid curing, ready for topcoat within 45 minutes (depending on temperature).
- Cold curing capability, cures down to -20oC
- Highly penetrating formula
- Prevents off-gassing of subsequent coatings
- Resistant to organic and inorganic chemical compounds and bacterial growth
Dur-A-Fast Primer is used as a primary priming coat for all Dur-A-Fast systems and products. It is used to seal the substrate, create a positive bond to the substrate and to reduce the occurrence of defects on any subsequent coats. Dur-A-Fast primer can be used on properly prepared concrete, masonry, wood, metal and other common construction substrates. Dur-A-Fast can be used in virtually all seasons, as it can be applied down to -20oC. Dur-A-Fast Primer is also used as a primer for all Durex® Dur-A-Fast systems, for decorative flooring systems, traffic bearing waterproofing system, industrial systems and waterproofing systems.
Polyurethane modified Methyl Methacrylate
Part A (Resin): Part B (Catalyst)
|Cure Time @ 23°C (75°F)|
|Pot Life-working time @ 23°C (75°F)|
7.9 m²/L (160 ft²/gal) @ 10 mils
|Viscosity (Brookfield) 23°C (75°F)|
430 cps (clear)
625 PSI (4.3 MPa) Failure at Concrete