4 m² /L (250 ft² /gal) @ 2 mils DFT
Cure & Seal Aid for Freshly Poured Concrete/Mortar is a single-component, solvent-borne, acrylic concrete-curing membrane. It is designed to be used as a high-performance solvent-borne acrylic sealing and curing coating for freshly poured concrete.
- Outstanding resistance to moisture vapour transmission (MVTR) and meets the requirements of ASTM C-309 for unit moisture loss (< 0.055 gm/cm2 of surface at 72 hours).
- VOC compliant.
- Easy to use.
- Cold curing.
Cure & Seal Aid for Freshly Poured Concrete/Mortar is a sealing and curing compound ideal for freshly poured concrete and mortar. Applying Cure & Seal Aid for Freshly Poured Concrete/Mortar over freshly poured concrete creates a moisture seal or barrier to assist the curing process. It conditions the fresh concrete to retain sufficient moisture during the curing process at normal temperature without the need of repeated water spraying and sealing.
| Colour | Please see Durex® Colour Selection Guide for available colour options. | |
| Resin Type | Solvent acrylic copolymer | |
| Coverage | 4 m² /L (250 ft² /gal) @ 2 mils DFT | |
| Cure Time @ 23°C (75°F), 55% RH |
| |
| Reducer/Clean-up | Mineral spirit/xylene/toluene |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232 | 30% (wt.) |
| Viscosity (Brookfield) 23°C (75°F) | ASTM D2196 | 20-100 cps |
| V.O.C. | ASTM D3960-05 | < 350 g/L |
| Specific Gravity | ASTM D333 |
|
