2.6m2 / L (106 ft2/gal) @ 10 mils DFT (16 mils WFT)
49.2m2 / pail (530 ft2 / pail) @ 10 mils DFT (16 mils WFT)
Ecto-Sil 1000 Elastomeric High-Build Decorative Silicone Coating is a high solid, breathable-silicone elastomeric coating, for use in vertical above-grade waterproofing applications. It can be used to provide a durable, long-term, watertight, weatherproof barrier that resists colour fade, chalking and degradation from natural weathering.
- Low VOCs, non-toxic
- Breathable water-resistive air barrier
- Durable coating, resistant to UV degradation and weathering
- Easy to apply, tack-free in 4 hours
- Excellent colour retention
- Excellent adhesion to most common construction surfaces
- Resists graffiti
Ecto-Sil 1000 is used as an architectural decorative coating for above-grade wall surfaces such as concrete, stucco, masonry, urethane foam, wood, EIFS, and various painted surfaces. Ecto-Sil 1000 also has graffiti-resistant properties and can be used as an anti-graffiti coating. Ecto-Sil 1000 can be applied over a variety of substrates. Contact Durabond Technical Services for further information.
| Colour | Please see Durex® Colour Selection Guide for available colour options. | |
| Product Type | Silicone-based elastomeric decorative coating | |
| Appearance | Heavy-bodied, paint-like consistency | |
| Dry Film Thickness | 10-15 mils (2 coats) | |
| Coverage Rate |
Coverage rate will vary according to the porosity and roughness of the surface being coated. Very rough or porous surfaces may require more than 2 coats to provide the required minimum 10 mils dry film thickness. | |
| Viscosity | 19,000 cps - test method WPSTM C-560 | |
| Specific Gravity | 1.21 g/mL (10.12 lb/gal) | |
| Density | 1.25 g/mL (10.45 lb/gal) | |
| Volatile Organic Content (VOC) | VOC 70 g/L; non-toxic | |
| Tack-Free Time | 2 hours | |
| Min. Application Temperature | -10°C | |
| Shelf Life | 2 years |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D2697 | 65% |
| Vapour Permeance | ASTM E96 | 11 perms |
| Elongation | ASTM D412 | 400% |
| Crack Bridging | 1.6 - 2 mm | |
| Adhesion | 220 Newton axial load: Pass |
