1 coat: 8 m2/L (320 ft2⁄gal)
2 coats: 4 m2/L (170 ft2⁄gal)
Dur-X-Cel 100 is an exterior-grade, flat acrylic latex-based paint specially designed for concrete and masonry substrates.
- Exceptional exterior durability.
- Excellent water repellency; protects wall from moisture penetration.
- Breathable coating; allows water vapour within the wall system to evaporate.
- Excellent adhesion to substrate.
- Abrasion resistant.
- Colourfast (no colour change under ultra-violet rays).
- Sprayable.
Dur-X-Cel 100 is used as premium quality paint for exterior masonry and concrete surfaces. This product may be pigmented to match almost any colour. Dur-X-Cel 100 is an effective long wearing protective coating for concrete and masonry surfaces on both new and existing structures. It is ideal for recoating of existing stucco surfaces.
| Product type | Water based acrylic coating | |
| Appearance | Dense, paint-like consistencyvv | |
| Viscosity | 100 - 150 cps - ASTM D2196 | |
| Density | 1.18 – 1.30 Kgs/lt | |
| Shelf Life | 3 years | |
| Ph Level | 9.0-9.5 | |
| Toxicity | Non-toxic | |
| Coverage |
Coverage will vary according to the porosity of the substrate, application method, colour of original substrate and colour of the Durex® Dur-X-Cel 100 to be applied. A test sample should be applied to establish practical coverage on the actual substrate. |
| Method | Results | |
|---|---|---|
| Consistency | ASTM D562 | 105 KU |
| Fineness of Grind | ASTM D1210 | 3 Hegman, 58 Microns |
| Alkali Resistance | ASTM D1308 | Pass |
| Gloss | ASTM D523 | 11.5 Gloss Units |
| CO2 Diffusion | ASTM F2476 | Pass 325 m - 7.8 g/m2/24hrs |
| Resistance to Wind Driven Rain | ASTM D6904 | Pass |
| Water Vapour Permeance | ASTM E96 | 1030 ng/Pa.s.m2 (18 Perms) |
| V.O.C. | 40 CFR 59.406 | < 50 g/lt (<0.42 lbs/gal) |
| Freeze-Thaw Stability | ASTM C67 | Pass 50 cycles |
| Flexibility | ASTM D522 | Pass |
| % Solids | 53% +/- 2% | |
| UV Exposure | No cracking | |
| Accelerated Weathering | ASTM G155 | Pass 2500 hrs. |
