300/ft² (27.87/m²) per Gallon @ 3 - 5 mils
Antico Glaze is a fine, translucent glaze that simulates a natural aging effect. It is a durable, acrylic polymer liquid coating for use over all Durex® finishes. Combine with RUSTICO, RASATO or SANDSTONE to achieve a luxurious two-tone finish. Use tone on tone, or off-tone colouring to obtain a surface with depth and complexity. ANTICO GLAZE can be tinted to virtually any colour, please refer to the Colour Chart for selection. Custom colour matching is available.
- Water-based non-toxic; easy to handle.
- Excellent dust proofing properties.
- Excellent resistance to mild acids.
- Very economical compared to solvent-based sealers.
- Re-coatable (does not promote delamination).
- Excellent compatibility with all cementitious surfaces.
- Compatible with most acrylic coatings.
- Available in a variety of standards colours; custom colour matching is also available.
Antico Glaze can be applied over many types of synthetic and cementitious textured coatings. It is specially formulated to be used over all Durex® Architectural Coatings.
| Product type | Water based acrylic coating | |
| Appearance | Dense paint consistency (ready mixed) | |
| Toxicity | Non-Toxic | |
| Density | 1.67 Kg/lt | |
| Bulk pot life | 2 years in can (sealed) | |
| Surface requirements | Clean, Dust Free Surface | |
| Coverage | Average coverage: 1500 ft2/pail (300 ft2/Gal) @ 3 – 5 mils |
| Method | Results | |
|---|---|---|
| Freeze/Thaw stability | ASTM C67 | Pass 50 cycles |
| Water Vapour Transmission | ASTM E96 | 630 ng/ Pa.s.m² (11 Perms) |
| Water Absorption | ASTM D570 | 6.01% |
| Surface burning characteristics | CAN4-S102 |
|
| Dry Adhesion | ASTM D4541 | 1.38 MPa (200 psi) |
| Alkali Resistance | ASTM D1308 | Pass |
| Accelerated Weathering Resistance | ASTM G155 | Pass 2500 hrs |
