4.9 m²/L - 7.4 m²/L (200-300 ft²/gal) @ 2 - 3 mils DFT
Acrotel DTM Water-Based Metal Coating is a single-component, high-performance, versatile water-based acrylic metal coating. It is formulated to meet the conditions and properties required for high adhesion to metals, primarily steel and aluminum.
- High-performance direct-to-metal (DTM) coating.
- Water based, safe and easy to handle.
- Very low odour and VOCs.
- Very good durability.
- Non-flammable.
- Good leveling, flow and microform-free properties.
- Outstanding adhesion to a variety of substrates. High-gloss latex.
- Excellent exterior properties.
- Excellent resistance to UV light.
Acrotel DTM Water-Based Metal Coating is used for coating steel, aluminum and galvanized steel for exterior and interior applications.
| Colour | Please see Durex® Colour Selection Guide for available colour options. | |
| Resin Type | Acrylic copolymer | |
| Coverage | 4.9 m²/L - 7.4 m²/L (200-300 ft²/gal) @ 2 - 3 mils DFT | |
| Cure Time @ 23°C (75°F), 55% RH |
| |
| pH Level | 8.0-9.0 | |
| Reducer/Clean-up | Water |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232-06 | 35 ± 5% (vol.) |
| Sheen (60°) | ASTM D3679 |
|
| Viscosity (Brookfield) 23°C (75°F) | ASTM D2196 | 70-85 KU |
| V.O.C. | ASTM D3960 | < 185g/L (< 1.54 lb/gal) |
| Cross Hatch Adhesion | ASTM D3359 | 5 |
| Flexibility (Conical Mandrel) 4 | ASTM D522 | Pass |
| Corrosion Resistance, Salt Spray 96 hours | ASTM B117 | D#8, #6 at scribe, M#6, #4 on face, 5 mm undercut |
| Specific Gravity | ASTM D333 | 1.12 ± 0.1 g/L |
| QUV Weathering |
|
|
