Acrotel SB Floor - Winter Grade
Exterior Concrete Floor Coating
Coverage

7.4 m²/L (300 ft²/gal) @ 3 mils DFT (2 coats recommended)

NMS
09 97 23
Description

Acrotel SB Floor – Winter Grade Exterior Concrete Floor Coating is a single-component, high-performance and extremely versatile solvent-borne acrylic floor coating. It is specially formulated for coating floor surfaces, such as masonry, metal and plaster.

Advantages
  • VOC compliant.
  • Water, mildew and alkaline resistant.
  • Self-priming.
  • Highly resistant to surface cracking.
  • Efflorescence resistant.
  • Resistance to saponification, caused by alkaline substrates.
  • Excellent breathability, allowing humidity to evaporate, yet protecting against water penetration, industrial pollution and acid rain.
  • Long-lasting adhesion to a variety of masonry substrates.
  • Excellent exterior durability and self-cleaning properties.
  • Low and high temperature application: -5°C to 40°C unlimited film-forming temperature.
  • Specially formulated for winter applications; can cure up to -20°C.
Uses

Acrotel SB Floor – Winter Grade Exterior Concrete Floor Coating is used as a decorative protective coating and finishing of exterior or interior concrete surfaces, particularly suitable for rough and otherwise imperfect surfaces. It is used for either exterior and interior applications at room temperature, as well as elevated or sub-zero conditions. Acrotel SB Floor – Winter Grade Exterior Concrete Floor Coating is a continuous monolithic surfacing which becomes an integral part of the substrate.

Physical Properties
 
Colour

Please see Durex® Colour Selection Guide for available colour options.

Resin Type

Acrylic solvent

Coverage

7.4 m²/L (300 ft²/gal) @ 3 mils DFT (2 coats recommended)

Cure Time @ 0°C (32°F), 55% RH
  • To touch/recoat: 1 hour
  • Fully cured: 2 days
Sheen, 60° (ASTM D3679)

<2%

Reducer/Clean-up

Xylene



Performance Properties
Method Results
Percent Solids

ASTM D7232

50-55% (vol.)

Viscosity (Brookfield) 23°C (75°F)

ASTM D2196

2,000-5,000 cps

V.O.C.

ASTM D3960

<350 g/L

Specific Gravity

ASTM D333

  • 1.2-1.3 g/L
  • 10 ± 2 lb/gal
Flexibility (Conical Mandrel), 4 in.

ASTM D522

Pass

Cross Hatch Adhesion

ASTM D3359

5 on galvanized steel