2.6m2 / L (106 ft2/gal) @ 10 mils DFT (16 mils WFT)
49.2m2 / pail (530 ft2 / pail) @ 10 mils DFT (16 mils WFT)
Ecto-Sil 1000 Elastomeric High-Build Decorative Silicone Coating is a high solid, breathable-silicone elastomeric coating, for use in vertical above-grade waterproofing applications. It can be used to provide a durable, long-term, watertight, weatherproof barrier that resists colour fade, chalking and degradation from natural weathering.
- Low VOCs, non-toxic
- Breathable water-resistive air barrier
- Durable coating, resistant to UV degradation and weathering
- Easy to apply, tack-free in 4 hours
- Excellent colour retention
- Excellent adhesion to most common construction surfaces
- Resists graffiti
Ecto-Sil 1000 is used as an architectural decorative coating for above-grade wall surfaces such as concrete, stucco, masonry, urethane foam, wood, EIFS, and various painted surfaces. Ecto-Sil 1000 also has graffiti-resistant properties and can be used as an anti-graffiti coating. Ecto-Sil 1000 can be applied over a variety of substrates. Contact Durabond Technical Services for further information.
Please see Durex® Colour Selection Guide for available colour options.
Silicone-based elastomeric decorative coating
Heavy-bodied, paint-like consistency
|Dry Film Thickness|
10-15 mils (2 coats)
Coverage rate will vary according to the porosity and roughness of the surface being coated. Very rough or porous surfaces may require more than 2 coats to provide the required minimum 10 mils dry film thickness.
9,000 to 12,000 cps
1.21 g/mL (10.12 lb/gal)
1.25 g/mL (10.45 lb/gal)
|Volatile Organic Content (VOC)|
VOC 70 g/L; non-toxic
|Min. Application Temperature|
1.6 - 2 mm
220 Newton axial load: Pass