11.2 m2/pail (120 ft2/pail)
Marble Coat 1.0 is a high build, multi-coloured, protective coating consisting of specially selected aggregates embedded in a clear, 100% acrylic resin. Marble Coat is available in two grades: Marble Coat 1.0 (finer texture) and Marble Coat 1.5 (coarser texture). This product is part of the Durex® Architectural Wall Coatings.
- Exceptional durability
- Traditional Textured finishes
- Excellent water repellency; protects surfaces from moisture penetration
- Breathable coating; allows water vapour within the wall system to evaporate
- Excellent adhesion to substrate
- Colourfast, not affected by ultra-violet rays
Marble Coat 1.0 is used an effective, long wearing, protective coating over all Durex® EIF Systems and Durex® Direct Applied Systems. This product is available in a variety of standard colours listed in the Durex® Colour Selection Guide. Marble Coat is also available in custom colours.
| Product type | Water based acrylic coating with integral quartz aggregates | |
| Appearance | Dense paint/sand-like consistency (ready mixed) | |
| Toxicity | Non-toxic | |
| Density | 1.67 kg/lt | |
| Bulk pot life | 2 years in can (sealed) | |
| Coating Thickness | 1 coat - 1.0 mm | |
| Coverage | Durex® Marble Coat 1.0: 11.2 m2/pail (120 ft2/pail) * Note that coverage values are approximated | |
| Surface Requirements | Primed with Durex® Brush Coat |
| Method | Results | |
|---|---|---|
| Freeze/Thaw stability | ASTM C67 | Pass |
| Water Vapour Transmission | ASTM E96 | 960 ng/Pa.s.m² (16.8 perms) |
| Water Absorption | ASTM D570 | 4.50% |
| Surface burning Characteristics | CAN4-S102 |
|
| Dry Adhesion | ASTM D4541 | 1.30 MPa (188 psi) |
| Alkali Resistance | ASTM D1308 | Pass - No blistering, wrinkle, lift or change in colour |
| Accelerated Weathering Resistance | ASTM G155 | Pass 2000 hrs |
