10.0 m²/pail (140 ft²/pail)
Pebble Float is a high build, multi-coloured, protective coating, consisting of coloured quartz aggregates embedded in a clear, 100% acrylic resin. It is one of the coating in the family of the Durex® Architectural Wall Coatings.
- Exceptional durability
- Traditional textured finish
- Excellent water repellency; protects surfaces from moisture penetration
- Breathable coating; allows water vapour within the wall system to evaporate
- Excellent adhesion to substrate
- Colourfast, not affected by ultra-violet rays
Pebble Float is used a decorative, long wearing, protective coating over all Durex® EIFS Systems and Durex® Direct Applied Systems. This product is available in a variety of standard colours listed in the Durex® Colour Selection Guide. Pebble Float is also available in custom colours.
| Product type | Water based acrylic coating with integral quartz aggregates | |
| Appearance | Dense paint/sand-like consistency (ready mixed) | |
| Toxicity | Non-toxic | |
| Density | 1.67 kg/lt | |
| Bulk pot life | 2 years in can (sealed) | |
| Coating thickness | 1 coat - 0.7 mm | |
| Coverage | 10.0 m²/pail (140 ft²/pail) | |
| Surface requirements | Primed with Durex® Brush Coat |
| Method | Results | |
|---|---|---|
| Freeze/Thaw stability | ASTM C67 | Pass |
| Water Vapour Transmission | ASTM E96 | 1035 ng/Pa.s.m² (18 perms) |
| Water Absorption | ASTM D570 | 4.50% |
| Surface burning Characteristics | CAN4-S102 |
|
| Dry Adhesion | ASTM D4541 | 1.30 MPa (188 psi) |
| Alkali Resistance | ASTM D1308 | Pass - No blistering, wrinkle, lift or change in colour |
| Accelerated Weathering Resistance | ASTM G155 | Pass 2000 hrs |
