1 coat: 9-11 m2/L (360-450 ft2⁄gal)
KOLOR COAT is a high quality, 100% acrylic based coating. Specially designed as the final coat for textured architectural coatings to render colour uniformity with minimal or not change to the existing texture.
- 100% acrylic latex formula for superior adhesion and compatibility with Durex Architectural Coatings
- Thin application, does not alter existing texture
- Breathable coating; allows water vapour within the wall system to evaporate
- Flat, non-reflective finish
- Single coat application
- Excellent colour retention and resistance to fading
- Most effective as final coat to textures of mass tone pigmentation for final colour uniformity
- Economical, high coverage
KOLOR COAT is used as a thin coating applied as the final coat or to existing texture finishes to render overall colour uniformity. Very effective in rectifying apparent colour variations in textured coatings that may be a result of variance in texturing application methods, substrate conditions, base product colour, variable climatic conditions etc. This product may be pigmented to match any colour.
| Product Type | Water-based 100% acrylic coating | |
| Sheen | 5 – 10 @ 60% | |
| Viscosity | 80 - 100 cps – ASTM D2196 | |
| Density | 1.15 – 1.25 Kgs/lt (9.0 – 10.3 Lbs/Gal) | |
| Shelf Life | 2 years | |
| Solids | By Volume : 35% +/- 2% By weight: 45% +/- 2% | |
| Toxicity | Non-toxic - VOC < 50 g/lt (<0.42 lbs/gal) | |
| Coverage | 1 coat: 9-11 m2/L (360-450 ft2⁄gal) Coverage will vary according to the porosity of the substrate, application method, colour of original substrate and colour of the Durex® KOLOR COAT to be applied. A test sample should be applied to establish practical coverage on the actual substrate. |
| Method | Results | |
|---|---|---|
| Consistency | ASTM D562 | 80 - 95 KU |
| Fineness of Grind | ASTM D1210 | 3 Hegman, 58 Microns |
| Alkali Resistance | ASTM D1308 | Pass |
| Gloss | ASTM D-23 | 9.5 Gloss Units |
| CO2 Diffusion | ASTM F2476 | Pass 325 m - 7.8 g/m2/24hrs |
| Resistance to Wind Driven Rain | ASTM D6904 | Pass |
| Water Vapour Permeance | ASTM E96 | 1350 ng/Pa.s.m2 (20 Perms) |
| V.O.C. | 40 CFR 59.406 | < 50 g/lt (<0.42 lbs/gal) |
| Freeze-Thaw Stability | ASTM C67 | Pass 50 cycles |
| Flexibility | ASTM D522 | Pass |
| Percent Solids | 45% +/- 2% | |
| UV Exposure | No cracking | |
| Accelerated Weathering | ASTM G155 | Pass 2500 hrs |
