Epotel TL Epoxy Trowel Binder is a two-component, 100% solids, solvent-free, liquid-applied, aggregate-filled binder. It is designed to be mixed with standard or decorative aggregates to provide a high-build, tough, durable, abrasion- and chemical-resistant coating for interior floor surfaces.
- 100% solids, zero VOCs, odourless.
- CFIA approved, USDA accepted.
- Low viscosity epoxy resin with excellent wetting properties for priming and coating.
- Excellent clarity for use as a finish coat or decorative aggregate binder.
- Abrasion, chemical and impact resistant.
- Self-leveling and seamless.
- High-gloss finish.
Epotel TL Epoxy Trowel Binder is used as a trowel- or screed-applied epoxy-based aggregate binder for decorative, self-leveling or trowel-applied flooring systems where high impact and abrasion resistance is required. These systems are to be used in heavy-duty industrial environments, sanitary environments subject to constant cleaning and as an effective repair material for problematic worn concrete floors. May also be used as a penetrating primer.
| Colour | Clear & Pigmented | |
| Resin Type | Epoxy | |
| Mix Ratio |
| |
| Cure Time @ 23°C (75°F) |
| |
| Pot Life - working time @ 23°C | 20-25 minutes | |
| V.O.C. | Zero |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232 | 100% |
| Viscosity (Brookfield) 23 degrees C | ASTM D2196, Part A + B | 750 (pigmented) - 400 (clear) cps |
| Compressive Strength | ASTM C695 | 44 MPa (6,370 psi) |
| Tensile Strength | ASTM C695 | 24 MPa (3,500 psi) |
| Tensile Modulus | ASTM D638 | 125 MPa (18,150 psi) |
| Elongation | ASTM D638 | 8% |
| Flexural Modulus | ASTM D790 | 2.4 MPa (350 psi) |
| Abrasion Resistance | ASTM D4060 | 0.033 |
| Shore D Hardness | 75 | |
| Chemical Resistance | Durex® Epotel TL Epoxy Trowel Binder resists damage by chemical reactivity and/or solvent reaction. Contact Durabond Technical Services for additional information. |
