4 m²/L @ 100 microns, 200 ft²/US gal @ 6 mils DFT (9 mils WFT)
Uraflex Citrus Primer is a two-component, modified polyurethane-penetrating primer for surfaces contaminated by oil and similar substances. This product is formulated to perform where concrete has been contaminated with oil-based substances.
- Excellent adhesion to a variety of contaminated substrates.
- Penetrates and aggressively adheres to substrates contaminated by oil and other similar substances.
- Very low surface tension.
- Very low VOCs.
- Excellent moisture resistance.
- May be applied on damp surfaces with no bubbles or foaming.
- Prevents leeching of contaminants up through the substrate.
- Excellent abrasion resistance.
Uraflex Citrus Primer penetrates through oil and similar contaminants to bond and seal the substrates, as well as release potential out-gassing and leeching. Uraflex Citrus Primer has exceptionally unique priming, penetrating, and application properties for problematic oil-soiled concrete substrates.
| Colour | Clear | |
| Resin Type | Urethane | |
| Mix Ratio |
| |
| Cure Time @ 5-23°C |
| |
| Coverage |
| |
| Recommended Film Thickness | 5 mils (75 µ) | |
| Pot Life - working time @ 23°C (75°) | 30 minutes | |
| Reducer/Clean-Up | Lacquer thinner or IPA | |
| V.O.C. | < 10 g/L |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232 | 60-65% |
| Viscosity (Brookfield) 23°C (75°F) | ASTM D2196 | 100 cps |
| Abrasion Resistance | ASTM 5178-91, CS-17 wheel | 45 mg, 1000 g load, 1000 cycles |
| Tensile Modulus | ASTM D638 | 2,400 psi |
| Elongation | ASTM D638 | 45% |
| Specific Gravity | ASTM D333 |
|
| Mar Resistance | ASTM D5178 | 1.0 kg |
