4/m² (160/ft²) per Litre @ 10.00 mils DFT
Epotel GSX is an industrial quality, clear, 100% solid, low odour, zero VOC and high gloss clear epoxy binder and coating. Epotel GSX is design to use for as a binder and clear epoxy coating. Epotel GSX is to be used for a variety of interior epoxy coating applications.
- Clear
- Self-leveling and seamless
- Self-priming
- Slower curing, easy to use
- Good hardness
- Good chemical and solvent resistance
- Excellent adhesion
- Very low odour
- Blushing-free properties
- Low viscosity
- Formulated using high-quality resins
- CFIA Approved / USDA Listed
Epotel GSX is used as a clear binder and clear epoxy coating in industrial floor system applications. The chemical resistance of the product makes it ideal for use in industrial environments not exposed by UV
| Colour | Clear | |
| Coverage | 4 m2/L (160 ft2/gal) @ 10 mils DFT – Varies depending on System | |
| Cure Time @ 23°C (75°F), 55% RH |
| |
| Recommended Film Thickness | 10-20 mils DFT - Varies depending on System | |
| Mix Ratio Part A (Resin): Part B (Catalyst) | 2:1 by volume | |
| Pot Life @ 23°C (75°F) | 30 – 35 minutes | |
| Reducer/Clean-up | Lacquer thinner or xylene |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232-06 | 100% (volume – clear) |
| Viscosity (Brookfield) 23°C (75°F), A+B | ASTM D2196 | 750 cps Clear |
| V.O.C. | ASTM D3960-05 | Zero |
| Specific Gravity (Part A + B) | ASTM D333 |
|
| Compressive Strength | ASTM 695-85 | 8,500 psi (58.6) MPa) |
| Tensile Strength | ASTM 695-85 | 1,850 psi (12.8 MPa) |
| Tensile Modulus | ASTM D638-86 | 480 psi (12.8 MPa) |
| Elongation | ASTM D638-86 | 8.0% |
| Flexural Modulus | ASTM D790-86 | 490 psi (3.4 MPa) |
| Abrasion Resistance | ASTM D4060-90 | 0.030g loss |
| Mar Resistance | ASTM D5178-91 | 1.0 kg |
| Shore D Hardness | 75 |
