5.9 m2/L (250 ft2/US gal) @ 3 mils DFT
Acrutel-100 High-Performance UV-Resistant Polyurethane Flooring Topcoat is an aliphatic, water-based, thin-build, liquid-applied urethane coating. This highly durable, high performing formulation offers excellent abrasion and UV resistance for colour and gloss stability for decorative resinous flooring and wall systems.
- Water-based, aliphatic polyurethane
- Water based, easy to apply
- Resistant to weathering and colour fade by UV rays
- Wide-service temperature range
- Excellent abrasion and impact resistance
- Good flow and leveling properties for finishing
- Non-staining chemical resistance
- Available in different finishes: Gloss, Semi-gloss, Satin and Matte
- Available in non-slip additive
- Low VOC, Low Odour.
Acrutel-100 High-Performance UV-Resistant Polyurethane Flooring Topcoat is a roller-applied protective topcoat used in a wide range of institutional, commercial and industrial floor applications where long-term durability, UV and abrasion resistance is required.
| Colour | Pigmented (Finishes: Gloss, Semi-gloss, Satin & Matte) | |
| Resin Type | Aliphatic Urethane/Acrylic | |
| Coverage |
| |
| Cure Time @ 23°C (75°F) |
| |
| Pot Life | 2 hours | |
| Mixing Ratio | 6:1 | |
| V.O.C. | < 65 g/L |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232-06 | 48 ± 5% (vol.) |
| Viscosity (Brookfield) 23°C (75°F) | ASTM D2196 | 500 cps |
| Abrasion Resistance | ASTM D4060-01 |
|
| Hardness (Pencil) | ASTM D3363 | 2H |
| Hot Water Immersion | ASTM D870 | Pass – no blisters after 500 hours @ 38°C (100°F) |
| QUV Weathering | ASTM G 154 CYCLE 7 | Complete Pass 1000 hours |
| Impact Test | ASTM D2794 | Pass direct/indirect 56 in.-lb |
| Sheen (60°) | ASTM D3679 |
|
| Specific Gravity | ASTM D333 |
|
| Coefficient of Friction | ASTM D2047-17 |
|
