Durex® Extreme Impact Lamina is comprised of 2 layers of Durex® High Impact Mesh as a reinforcement layer for a polymer-modified and polymer-based cementitious base coat, followed by an additional layer of Standard Impact Mesh and basecoat, totalling 3 reinforcement layers. It is used as the ultimate reinforcing mesh layer in Durex® EIFS Systems and Durex® Stucco Lite System (except for mechanically fastened EIFS systems).
- Capable of withstanding 40 - 60 N.m/cm2 impact forces without breakage of the reinforcement layer
- Forces equivalent to a 2x4 14ft Long - 9lbs @ 55 kph, or;
- 10 Heavy Strikes with an 8lb Sledge Hammer
- Fibreglass mesh of tested quality, capable of withstanding high tension without stretching
- Glass fibres with negligible sensitivity to temperature changes within the wall
- Proper fibreglass anti-alkaline dressing to avoid quick aging of the wall reinforcement due to corrosion action of alkalis present in coating mortar
- Provides dimensional stability and enhances performance
- Extreme Reinforcement Mesh for the base coat layer in all Durex® EIFS Systems when superior and ultimate impact resistance is required
Product | Fibreglass Mesh |
Base Coat |
Product Type | E-Glass fibres |
Depends on Base Coat |
Appearance | White woven fabric with leno weave pattern |
Depends on Base Coat |
Weight | High Impact Mesh: 15.4 oz/yd2 (522 g/m2)
Standard Impact Mesh: 4.3 oz/yd2 (145 g/m2) |
- |
Roll Widths | High Impact Mesh:
Standard Impact Mesh: |
- |
Finish | Alkali-Resistant Coating, optional Adhesive Coating |
Depends on Base Coat |
Coverages | High Impact Mesh:
Standard Impact Mesh: 150 ft2 (13.9 m2) per roll (12”) 110 ft2 (10.5 m2) per roll (9”) 50 ft2 (4.6 m2) per roll (4”) |
Depends on Base Coat |
Weight Drop Impact Test | ASTM E2486 |
Pass – No Breakage |
System Layer | Optional Products Per Layer | Notes |
---|---|---|
Reinforcing Mesh | ||
Base Coat |