Standard Plus Impact Resistant Lamina
Standard Plus Impact Resistant Lamina
Above Standard Impact Resistant Lamina
System Description
Components
Technical Information
Documentation
Description
Durex® Standard Plus Impact Lamina is comprised of a layer of Durex® Standard Plus Mesh as a reinforcement layer for a polymer-modified and polymer-based cementitious base coat, and used as the above-standard-grade reinforcing mesh layer in Durex® EIFS Systems and Durex® Stucco Lite System (except for mechanically fastened EIFS systems).
Advantages
- Capable of withstanding 4 - 10 N.m/cm2 impact forces without breakage of the reinforcement layer
- Forces equivalent to Medium Hail (5-15mm), and;
- Large Hail (20 mm diameter.)
- Fibreglass mesh of tested quality, capable of withstanding high tension without stretching
- Glass fibers with negligible sensitivity to temperature changes within the wall
- Proper fiberglass anti-alkaline dressing to avoid quick aging of the wall reinforcement due to the corrosion action of alkalis present in coating mortar
- Provides dimensional stability and enhances performance
Uses
- Standard Reinforcement Mesh for the base coat layer in all mechanically fastened Durex® EIFS Systems
Physical Properties
Product | Fiberglass Mesh |
Base Coat |
Product Type | E-Glass fibres |
Depends on Base Coat |
Appearance | White woven fabric with leno weave pattern |
Depends on Base Coat |
Weight | 4.3 oz/yd2 (145 g/m2) |
- |
Roll Widths | 38” |
- |
Finish | Alkali-Resistant Coating, optional Adhesive Coating |
Depends on Base Coat |
Coverages | 450 ft2 (41.8 m2) per roll (38”) |
Depends on Base Coat |
Performance Properties
Weight Drop Impact Test | ASTM E2486 |
Pass – No Breakage |
System Layer | Optional Products Per Layer | Notes |
---|---|---|
Reinforcing Mesh | ||
Base Coat |