2.95 m2/L (600ft2/pail) @ 1 coat
1.97 m2/L (400ft2/pail) @ 2 coats
Brush Coat Plus is one of the various exterior textures offered by Durabond Products Ltd. under the trade name of Durex® Architectural Coatings. Brush Coat Plus is a high build protective coating 100% acrylic based, similar to Brush Coat with the addition of extra aggregate sands. It is primarily roller applied, resulting in a light, uniform, heavy sand textured finish. It can also be applied by brush.
- Exceptional exterior durability.
- Excellent water repellency, protects wall from moisture penetration.
- Breathable coating, allows water vapour within the wall system to evaporate.
- Excellent adhesion to substrate.
- Abrasion resistant.
- Colour fast (not affected by ultra violet rays).
- Heavy duty protective coating.
Brush Coat Plus in a two coat application is an effective long wearing protective coating for concrete and masonry, for new as well as existing structures. Brush Coat Plus provides a uniform appearance in both colour and texture. Brush Coat Plus in a one coat application is an effective primer for all Durex® Architectural Coatings.
Water based acrylic protective coating
Dense paint-like consistency
3500 - 4500 cps - ASTM D2196
127 - 135 KU - ASTM D562
9.0 to 9.5
Coverage will vary according to the porosity of the substrate
|Surface burning Characteristics|
Flame Spread – 8
Fuel contributed <5, Smoke developed ,5
Pass 5000 hrs.
|Freeze / Thaw resistance|
Pass 60 cycles
Pass 5000 hrs
1.55 MPa (225 psi)
4.55% by weight
|Water Vapour Permeance|
615 ng/Pa.s.m2 (10.7 perms)
|Salt Spray Resistance|
Pass 300 hrs
|Ultimate Tensile Strength|
1.62 MPa (235 psi)