225 ft² (20.9 m²) per roll (38")
Ultra-High Impact Mesh is an alkaline coated fiberglass fabric which is suitable to work as reinforcement for polymer modified and polymer-based cementitious base coats, and used as a ultra-heavy duty mesh layer in all Durex® EIFS Systems and Durex® Stucco Lite System. Durex® Ultra-High Impact Mesh is produced on a loom using warp and weft (fill) yarns and woven into a leno weave, where the fill yarns are trapped tightly between to twisting wrap yarns, and is then treated by alkali-resistant macromolecule latex for superior performance.
- Fiberglass mesh of tested quality, capable of withstanding Ultra-High tension without stretching.
- Glass fibers with negligible sensitivity to temperature changes within the wall Proper fiberglass anti-alkaline dressing to avoid quick aging of the wall reinforcement due to corrosion action of alkalis present in coating mortar.
- Provides dimensional stability and enhances performance.
- Prevents cracking.
- ood cohesion.
- Flexible.
Ultra-Heavy-Duty Reinforcement Mesh for the bas coat layer in all Durex® EIFS Systems when very Ultra-High levels of impact resistance is required. Ultra-Heavy-Duty Reinforcement Mesh for Durex® Stucco Lite System. Ultra-Heavy-Duty Reinforcement for crack bridging in masonry substrates.
Product type | E-Glass fibers | |
Appearance | White woven fabric with leno weave pattern | |
Weight | 20.1 oz/yd² (680 g/m²) | |
Roll Widths | 38" | |
Finish | Alkali Resistant Coating | |
Coverage | 225 ft² (20.9 m²) per roll (38") |
Method | Results | |
---|---|---|
Tensile Strength (Weft) | ASTM D5035 | 820 lb./in (3650 N/2.54 cm) minimum values |
Tensile Strength (Warp) | ASTM D5035 | 885 lb./in (3945 N/2.54 cm) minimum values |
Construction (Weft) | ASTM D3775 | 3.1 yarns/in (12 yarns/10 cm) |
Construction (Warp) | ASTM D3775 | 3.7 yarns/in (15 yarns/ 10 cm) |