450 ft² (41.8 m²) per roll (38")
Standard Plus Mesh is an alkaline coated fiberglass fabric which is suitable to work as reinforcement for polymer modified and polymer-based cementitious base coats, and used as the standard reinforcing mesh layer in all Durex® EIFS Systems using Mechanical fasteners. It is also an upgraded reinforcing mesh layer in all Durex® EIFS Systems (chemically adhered) and Durex® Stucco Lite System. Standard Plus Mesh is produced on a loom using warp and weft (fill) yarns and woven into a leno weave, where the fill yarns are trapped tightly between to twisting wrap yarns, and is then treated by alkali-resistant macromolecule latex for superior performance.
- Fiberglass mesh of tested quality, capable of withstanding high tension without stretching.
- Glass fibers with negligible sensitivity to temperature changes within the wall.
- Proper fiberglass anti-alkaline dressing to avoid quick aging of the wall reinforcement due to corrosion action of alkalis present in coating mortar.
- Provides dimensional stability and enhances performance.
- Prevents cracking.
- Good cohesion.
- Highly flexible.
Standard Reinforcement Mesh for the bas coat layer in all mechanically fastened Durex® EIFS Systems. Upgraded Reinforcement Mesh for the base coat layer in all chemically adhered Durex® EIFS Systems. Upgraded Reinforcement Mesh for Durex® Stucco Lite System. Upgraded Reinforcement of EctoFlex Air/Vapour barrier and Waterproofing Membrane. • Upgraded for crack bridging in masonry substrates
| Product type | E-Glass fibers | |
| Appearance | White woven fabric with leno weave pattern | |
| Weight | 5.9 oz/yd² (200 g/m²) | |
| Roll Widths | 38" | |
| Finish | Alkali Resistant Coating, optional Adhesive Coating | |
| Coverage | 450 ft² (41.8 m²) per roll (38") |
| Method | Results | |
|---|---|---|
| Tensile Strength (Weft) | ASTM D5035 | 245 lb./in (1100 N/2.54 cm) minimum values |
| Tensile Strength (Warp) | ASTM D5035 | 170 lb./in (750 N/2.54 cm) minimum values |
| Construction (Weft) | ASTM D3775 | 5.4 yarns/in (21 yarns/10 cm) |
| Construction (Warp) | ASTM D3775 | 5.0 yarns/in (19.5 yarns/ 10 cm) |
