Lite Coat Sports Court is a non-combustible direct applied wall coating system with extra high impact resistance to resist the continuous hard impact of balls typical of Squash and Raquet Ball. The system consists of a mulitude of coats (as may be required to level out the substrate and render the final surface true and plumb for reliable ball bounce. Depending on project conditions, the system may include metal lath, fiber glass mesh as well as fiberglass fiber shorts. The finish consists of a blend of white cements fine hard fillers & polymers to render a fine high impact finish surface.
- Reliable and dependable high impact performance
- Non-combustible
- Excellent for both new and retrofit work
Lite Coat Sport Court is a specially designed as a reliable and durable high impact finish for masonry and concrete substrates. (For other substrates consult Durabond for recommendations).
| Building Code Conformance | Classification |
Category 2 |
Non-Combustible Stucco cladding System |
Part 3 |
|
|
|
Part 5 |
Section 5.6.1 |
Protection from Precipitation |
|
Part 9 |
n/a |
n/a |
|
| SUBSTRATE: | Concrete / Masonry |
New or existing concre / masonry |
must be clean & sound (refer to system specifications for further details |
| WATER RESISTIVE BARRIER: | Not applicable |
||
| REINFORCEMENT: | Galvanized metal lath |
ASTM 525 |
Min. 1.36kg/m² (Additional reinforcement can be achieved by adding synthetic fibers to the scratch coat) |
| BASE COAT: |
|
|
|
| FINISHES: | Durex Architectural Coatings Durex Uniplast White / Acrylic Resin Bond |
(refer to system specifications for application specific details) |
|
| PERFORMANCE: | Shear Bond Adhesion |
ASTM C882 |
11.20 MPa (1625 psi) |
Water absorption |
ASTM D570 |
1.9% (Uniplast) |
|
Tensile Strength |
ASTM C190 |
6.00 MPa (870 psi) |
| System Layer | Optional Products Per Layer | Notes |
|---|---|---|
| 2 Layers Base Coat | ||
| Finish Coat | ||
| Top Coat | ||
| Galvanized Trim |