Stucco Lite is a non-insulated wall coating system. The system consists of a glass fibre reinforcing mesh, trim accessories, scratch and base coats, and a finish texture coat which can be selected from any one of the available Durex® Architectural Coatings.
- Economical
- Easy to install
- Impact resistant
- Versatile
- Excellent for both new construction and retrofit work
Stucco Lite system can be used for both new and restoration work. It is highly recommended for use on temporary structures, such as sales pavilions, and in high humidity areas, including swimming pools.
| Building Code Conformance | Classification |
Category 2 |
Non-Combustible Stucco cladding System |
Part 3 |
|
|
|
Part 5 |
|
|
|
Part 9 |
|
|
|
| SUBSTRATE: | - Cementitious backer Board - Glass Mat Gypsum Sheathing - Concrete |
ASTM C1325 ASTM C1177 |
12.7 mm (1/2”) min. 12.7 mm (1/2”) min. |
| WATER RESISTIVE BARRIER: | Air / Vapour Barriers (consult with a Durabond Representative) Air Barriers Durex Flexcrete |
ASTM E96 Water Vapour Transmission (Refer to product specific Technical Data Sheet for more detailed data) |
Method A Method B n/a n/a
400 ng/Pa.s.m2 972 ng/Pa.s.m2 |
| REINFORCEMENT: | Impant Resistance Durex Fiberglass Mesh (Note: Impact resistance level is directly related to the weight and layers of Fiberglass mesh used in the lamina) |
ASTM E2486 – Impact Resistance (Refer to Table 1.5.9 of the Stucco Lite Specifications for detailed selection chart for guidance on level of impact resistance required) |
Retention Retention Physical Performance Standard 3 N.m 10 N.m PASS Intermediate 8 N.m 15 N.m PASS High 13 N.m 20 N.m PASS Ultra High 20 N.m 30 N.m PASS Extreme 25 N.m 40 N.m PASS |
| BASE COAT: | - Durex Flexcrete or - Durex Monobase - Durex Uniplast / Acrybond “S” |
CAN/ULC S114 CAN/ULC S114 |
Rated noncombustible Rated noncombustible |
| FINISHES: | Durex Architectural Coatings Classic Series Premium Series Artisan Series Kolor Gard Series Elastomeric (FX) Series |
CAN/ULC S716.1 & CCMC Report # 13103-R (Refer to product specific Technical Data Sheet and CCMC Evaluation Report #13103-R for more detailed data) |
Durex Architectural Coatings Meet and exceed all requirements |
| PERFORMANCE: | Water Vapour Transmission |
ASTM E96 - Flexcrete |
400 ng/Pa.s.m2 (7.0 perms) method A 972 ng/Pa.s.m2 (17.0 perms) method B |
Water absorption |
ASTM D570 |
4.85% (Flexcrete) |
|
Coefficient of Water Absorption |
CCMC 5.5.1 |
0.0007 kg/(m2.s1/2) (Flecrete) |
| System Layer | Optional Products Per Layer | Notes |
|---|---|---|
| Water Resistive Barriers (WRB) | ||
| Transition Membrane | ||
| Base Coat | ||
| Reinforcing Mesh | ||
| Primers | ||
| Finishes - Classic Series | ||
| Finishes - Premium Series | ||
| Finishes - Artisan Series | ||
| Finishes - Flexible Series | ||
| Finishes - Kolor Gard |