600ft2/pail @ 1 coat
400ft2/pail @ 2 coats
Brush Coat is one of the various exterior textures offered by Durabond Products Ltd. under the trade name of Durex Architectural Coatings. Brush Coat is a high build protective coating 100% acrylic based. It is the most versatile of the Durex Architectural Coatings products. It is primarily roller applied, resulting in a light, uniform, sand textured finish. It can also be applied by brush.
- Exceptional exterior durability.
- Excellent water repellency, protects wall from moisture penetration.
- Breathable coating, allows water vapour within the wall system to evaporate.
- Excellent adhesion to substrate.
- Abrasion resistant.
- Colour fast (not affected by ultra violet rays).
- Heavy duty protective coating.
Brush Coat in a two coat application is an effective long wearing protective coating for concrete and masonry, for new as well as existing structures. Brush Coat provides a uniform appearance in both colour and texture. Brush Coat in a one coat application is an effective primer for all Durex Architectural Coatings.
Water based acrylic protective coating
1.20 – 1.34 Kg/lt
10,000 to 15,000 cps
9.0 to 9.5
Coverage will vary according to the porosity of the substrate
|Surface Burning Characteristics|
Pass 5000 hrs.
|Freeze / Thaw resistance|
Pass 60 cycles
Pass 5000 hrs
1.48 MPa (215 psi)
3.78% by weight
|Water Vapour Permeance|
412 ng/Pa.s.m2 (7.42 perms)
|Salt Spray Resistance|
Pass 300 hrs
|Ultimate Tensile Strength|
1.53 MPa (222 psi)
|Reduction of Chloride Penetration|