4 m²/L (160 ft²/gal) @ 10 mils DFT per coat (2 coats required)
Epotel UR Abrasion-Resistant High-Build Epoxy Floor Coating is a two-component, 100% solids, solvent-free, liquid-applied, modified epoxy floor coating system. It is formulated with greater elongation and crack-bridging properties for increased flexibility, but capable of withstanding higher impact loads, while maintaining abrasion and chemical resistance.
- 100% solids, zero VOCs, odourless.
- CFIA approved, USDA accepted.
- Fast setting, easy to apply, self-leveling properties.
- Adheres to damp concrete.
- Chalk resistant.
- Tough, durable, abrasion and impact resistant.
- Blush-resistant high-gloss finish.
Epotel UR Abrasion-Resistant High-Build Epoxy Floor Coating is roller- or squeegee-applied and may be used as an abrasion-resistant protective sealer topcoat and/or protective binder coating with broadcast aggregate in commercial and industrial floor applications.
| Colour | Clear & Pigmented | |
| Resin Type | Epoxy/Urethane Hybrid | |
| Coverage Rate | 4 m²/L (160 ft²/gal) @ 10 mils DFT per coat (2 coats required) | |
| Mix Ratio | 2:1 (Part A : Part B) by volume | |
| Cure Time @ 23°C (75°F) |
| |
| Pot Life (Working time @ 23°C) | 20-25 minutes | |
| V.O.C. | Zero |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232 | 100% |
| Viscosity (Brookfield) 25°C (75°F) | ASTM D2196 Part A + B |
|
| Specific Gravity | ASTM D333 |
|
| Compressive Strength | ASTM 695 | 40.5 MPa (5,860 psi) |
| Tensile Strength | ASTM 638-M | 9.6 MPa (1,350 psi) |
| Tear Strength | ASTM D624 | 998 lb/in (6.9 MPa) |
| Elongation | ASTM D638 | 20% |
| Abrasion Resistance | ASTM D4060 | 25 mg |
| Shore D Hardness | ASTM D2240 | 75 |
| Chemical Resistance | Durex® Epotel UR Abrasion-Resistant High-Build Epoxy Floor Coating has the ability to resist damage by chemical reactivity or solvent action, including discolouration. |
