150/ft² (13.93/m²) per Gallon @ 10.00 mils (0.2540 mm)
Uraflex 100 OP Flexible Orange Peel Industrial Floor Coating is a 100% solids, two-component polyurethane protective industrial floor coating with a slightly textured finish. It is specially formulated to perform where greater hiding power, low temperature, flexibility and chemical resistance are required. This product has excellent chemical properties which make it an extremely versatile coating that outperforms standard epoxy coatings.
- Textured, easy-to-use finish
- Hides flooring imperfections
- Excellent adhesion to a variety of substrates
- Outstanding stability at low temperatures
- Zero VOC, 100% solid urethane
- Excellent moisture resistance
- Bonds to metal
- Smooth, bubble-free film surface
- Abrasion resistant
- Penetrates and seals the surface
- Can be applied on walls > 250 microns thickness
- Canadian Food Inspection Agency approved, USDA accepted
Uraflex 100 OP Flexible Orange Peel Industrial Floor Coating is used in a variety of light-to-medium-duty interior protective floor coating applications where increased hiding power is required. It is typically used as a topcoat on irregular floors to hide imperfections. Uraflex OP 100 is also used for industrial flooring topcoat, production areas, food processing and pharmaceutical plants.
| Colour | Pigmented | |
| Mix Ratio |
| |
| Cure Time @ 23°C (75°F) |
| |
| Coverage | 4 m²/L (150 ft²/US gal) @ 10 mils | |
| Recommended Film Thickness | 5 mils (75 microns) min to 16 mils (400 microns) max | |
| Pot Life - working time @ 23°C (75°F) | 15 minutes | |
| Reducer/Clean-up | Lacquer thinner or IPA | |
| V.O.C. | Zero |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232 | 100% |
| Viscosity (Brookfield) 23°C (75°F) | ASTM D2196 | 4,500 cps |
| Abrasion Resistance | ASTM 5178-91, CS-17 wheel | 20 mg loss @ 1000 g load, 1000 cycles |
| Tensile Strength | ASTM D412 | 2,700 psi |
| Specific Gravity | ASTM D333 | 1.1-1.2 g/L (8.9-10 lb/gal) |
| Elongation | ASTM D412 | 45% |
| Low Temperature Flexibility | 1/8" Mandrel Bend @ -26C | Pass |
| Tear Strength | ASTM D624 Die C | 171 lb./In. inch (30KN/linear metre) |
| Adhesion to Concrete | ASTM C794 | > 350 psi (2.4 MPa): Concrete Fails |
| Shore Hardness A | ASTM C661 | 95 |
| Water Swelling | 6 hours | 0.05 (max % weight gain) |
