4 m²/L (160 ft²/gal) @ 10 mils DFT
Epotel GSA Industrial/Commercial Concrete Epoxy Floor Coating is a two-component, solvent and VOC free, 100% solids epoxy concrete floor coating. Epotel GSA is a high-quality, thin build epoxy coating with excellent hiding power. It is specifically designed for use in warehouse and light manufacturing environments.
- Self-leveling and seamless
- Self-priming
- Slower curing, easy to use
- Good hardness
- Good chemical and solvent resistance
- Excellent adhesion
- Very low odour
- Blushing-free properties
- Low viscosity
- Good resistance to yellowing
- Formulated using high-quality resins
Epotel GSA Industrial/Commercial Concrete Epoxy Floor Coating is an ideal, versatile epoxy floor coating for use in industrial and warehouse facilities.
| Colour | Pigmented | |
| Coverage | 4 m²/L (160 ft²/gal) @ 10 mils DFT | |
| Cure Time @ 23°C (75°F), 55% RH |
| |
| Recommended Film Thicknes | 16-18 mils DFT | |
| Mix Ratio Part A (Resin): Part B (Catalyst) | 2:1 by volume | |
| Pot Life @ 23°C (75°F) | 30 - 35 minutes | |
| Reducer/Clean-up Lacquer thinner or xylene | Lacquer thinner or xylene |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232 | 100% (volume - clear) |
| Viscosity (Brookfield) 23°C (75°F), A+B | ASTM D2196 |
|
| V.O.C. | ASTM D3960 | Zero |
| Specific Gravity (Part A + B) | ASTM D333 |
|
| Compressive Strength | ASTM 695 | 8,500 psi (58.6) MPa) |
| Tensile Strength | ASTM 695 | 1,850 psi (12.8 MPa) |
| Tensile Modulus | ASTM D638 | 480 psi (12.8 MPa) |
| Elongation | ASTM D638-86 | 8.0% |
| Flexural Modulus | ASTM D790 | 490 psi (3.4 MPa) |
| Abrasion Resistance | ASTM D4060 | 0.030g loss |
| Mar Resistance | ASTM D5178 | 1.0 kg |
| Shore D Hardness | 75 |
