380/ft² (35.30/m²) per Gallon @ 4.00 mils (0.1016 mm)
Dur-A-Static ESD 100 is a high-performance epoxy-based electrostatic discharge (ESD) intermediate conductive coating for the Dur-A-Static ESD flooring system. Dur-A-Static ESD 100 is designed for use as a static dissipative intermediate coating that, as a system, provides electric conductive resistance to protect sensitive electronic equipment and machinery. The system performs to a range of 2.5 x 104 to 1.0 x 106 ohms. The system consists of a priming/leveling layer which is then combined with conductive grounded copper wire, Dur-A-Static ESD 100 intermediate conductive coat and Dur-A-Static 200 Topcoat.
- Protects sensitive electronic parts from the effects of static charges by dissipating them away
- Prevents explosions due to sparks of accumulated static charges by effectively conducting it away
- Avoid errors in readings recorded by sensitive electronic instruments monitoring vital parameters
- Enables easy maintenance of clean room environment through its seamless, pore-free smooth surface
- Improves the working environment by its pleasant aesthetics
- Conforms to ANSI S20.20, < 3.5 x 107 ohms when tested in accordance with ANSI STM 97.1
- Available in conductive range (2.5 X 104 to 1.0 X 106) ohms per ANSI/ESD S7.1/ASTM F-150
- Low BVG, Body Voltage Generation
- Maintain electrical resistance throughout coating thickness
Dur-A-Static ESD 100 is the Intermediate Conductive Layer for Dur-A-Static ESD 100 Electrostatic Discharge (ESD) flooring system to provide electrostatic control properties to concrete and other construction substrates. The system is recommended for floors in environments where static electricity and stray currents produced by friction could pose risks of explosions or interference with the working of precision electronic instruments. Dur-A-Static ESD 100 is ideal for data processing centers, computer and IT-related rooms and processing facilities, dry powder filling and handling facilities, solvent handling facilities, flammable gas handling locations, aircraft and aerospace facilities and hangars. It is also used for Pharmaceutical plants, hospitals and health care facilities / laboratories, electronic-based manufacturing facilities and production areas with electrically sensitive equipment, computer, conductor and circuit board production areas and explosion hazard facilities.
| Colour | Black | |
| Resin Type | Water-based Epoxy | |
| Mix Ratio |
| |
| Coverage | 380-400 ft²/gal @ 4-5 mils WFT | |
| Cure Time @ 23°C | To recoat: 8-24 hours | |
| Pot Life @ 23°C | 2 hours | |
| Recommended Film Thickness | 4-5 mils WFT |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232 | 55% |
| V.O.C. | ASTM D3960 | 0 g/L |
| Specific Gravity (Mixed) | ASTM D333 | 1.13 ± 0.05 g/L |
| Viscosity (Brookfield, 23°C) | ASTM D2196 | 1000-1500 cps |
| Abrasion Resistance | ASTM 5178-91 CS-17 wheel | |
| Tensile Strength | ASTM D638 | |
| Compressive Strength | ASTM C579 | |
| Adhesion to Concrete | ASTM D4541 | > 350 Psi Concrete fails |
