Resinous Floor Coatings
Uraflex 100
100% Solids Urethane Flexible Industrial Floor Coating
Coverage

150 SF / Gal @ 10 mils

NMS
09 67 00
Product Description
Technical Performances
Documentation
Description

Uraflex 100 Flexible Industrial Floor Coating is a 100% solids, two-component polyurethane protective industrial floor coating. It is specially formulated to perform where low temperature, flexibility and chemical resistance are required. This product has excellent chemical properties which make it an extremely versatile coating that outperforms standard epoxy coatings.

Advantages
  • Excellent adhesion to a variety of substrates.
  • Outstanding stability at low temperatures.
  • Zero VOC, 100% solid urethane.
  • Excellent moisture resistance.
  • Bonds to metal.
  • Smooth, bubble-free film surface.
  • Abrasion resistant.
  • Penetrates and seals the surface.
  • Can be applied on walls > 250 microns thickness.
  • Canadian Food Inspection Agency approved, USDA accepted.
Uses

Uraflex 100 Flexible Industrial Floor Coating is used in a variety of interior protective floor-coating applications. Uraflex 100 is ideal for: Industrial floor coating, Pipe line coating, Tank coating, Food processing and pharmaceutical plants, as well as a primer for wood.

Physical Properties
 
Colour

Clear and Pigmented

Mix Ratio
  • Part A (Resin):Part B (Urethane)
  • 3:1 by volume
Cure Time @ 23°C (75°F)
  • To touch: 6 hours
  • To recoat: 6 hours
  • To traffic: 48 hours
  • Fully cured: 4 days
Coverage

4 m²/L (150 ft²/US gal) @ 10 mils

Recommended Film Thickness

5 mils (75 microns) min to 16 mils (400 microns) max

Pot Life - working time @ 23°C (75°F)

15 minutes

Reducer/Clean-up

Lacquer thinner or IPA

V.O.C.

Zero


Performance Properties
Method Results
Percent Solids

ASTM D7232

100%

Viscosity (Brookfield) 23°C (75°F)

ASTM D2196

2,500 cps

Abrasion Resistance

ASTM 5178-91, CS-17 wheel

20 mg loss @ 1000 g load, 1000 cycles

Tensile Strength

ASTM D412

2,700 psi

Specific Gravity

ASTM D333

1.1-1.2 g/L (8.9-10 lb/gal)

Elongation

ASTM D412

45%

Low Temperature Flexibility

1/8" Mandrel Bend @ -26C

Pass

Tear Strength

ASTM D624 Die C

171 lb./In. inch (30KN/linear metre)

Adhesion to Concrete

ASTM C794

> 350 psi (2.4 MPa): Concrete Fails

Shore Hardness A

ASTM C661

95

Water Swelling

6 hours

0.05 (max % weight gain)

Water Vapour Transmission

ASTM E96 - Procedure B

  • 0.05 grain/hr.pi² 
  • 0.029 g/hr.m²
Water Vapour Permeability

ASTM E96

  • 0.20 Perm In.
  • 0.0025 ng/Pa.s.m²
Water Vapour Permeance

ASTM E96

  • 4.70 x 10 - 5 perm
  • 0.028 ng/Pa.s.m²