Dur-A-Hard SLF
Fine Self-Leveling Cementitious Polyurethane Flooring System
Coverage

30 SF @ 1/8" Thickness

NMS
096200
Description

Dur-A-Hard SLF Fine Self-Leveling Cementitious Polyurethane Flooring System is a fine, pourable, phthalate & solvent-free, cementitious polyurethane floor topping system designed to provide a tough and durable, non-slip textured surface for wet and dry production areas predominately in the food and beverage industry.

Advantages
  • CFIA approved; USDA accepted.
  • Zero VOC’s, odorless, and non-tainting.
  • Resistant to organic and inorganic chemical compounds and bacterial growth.
  • Chemical and abrasion resistant.
  • Wide Service Temperature Range (-10oC to 120oC).
  • Easy to apply, easy to clean and sterilize.
  • May be applied at low temperatures (5 degrees C).
  • Seamless waterproof slip-resistant floor topping.
  • Will bond to mild steel and water-resistant plywood.
Uses

Dur-A-Hard SLF Fine Self-Leveling Cementitious Polyurethane Flooring System is a squeegee applied, odourless, 1/8” (2-4mm) self-leveling medium duty flooring system approved for use in the Food and Beverage Industry. Dur-A-Hard SLF Fine Self-Leveling Cementitious Polyurethane Flooring System is designed to protect concrete floors surfaces against organic and inorganic chemical compounds, bacterial growth. Dur-A-Hard SLF is ideal for: Pharmaceutical laboratories and clean rooms, Chemical processing plants and containment storage rooms, Production processes exposed to aggressive chemicals, Food & Beverage processing plants, for medium duty applications, Hospitals and medical centers, Commercial kitchens, Wet areas, loading docks and garbage rooms, as well as Wet and High Impact Areas.

Physical Properties
 
Adhesion to Concrete

>400 psi (concrete fails before loss of bond)

Cure Time @ 21°C
  • Foot Traffic: 12-24 hours
  • Light Traffic: 24-36 hours
  • Full Service: 48 hours
  • Full Cure: 240 hours
Coverage (per kit)

2.8 m² @ 3 mm (30 ft² @ 1/8 in)

Pot Life
  • 20 minutes - working time @ 21°C
  • Note: Pot life is shorter at higher temperatures. Do not use below 5°C or above 30°C.
Service Temperature

-10°C to 110°C (steam wash)

Mix Ratio
  • 4 Component Kit -
  • Part A (Resin - 2.0 kg)
  • Part B (Hardener - 2.5 kg)
  • Part C (Aggregate mix - 10.0 kg)
  • Part D (Colourant - 0.5 kg)


Performance Properties
Method Results
Abrasion Resistance

ASTM C501

35 mg loss

Coefficient of Friction

ASTM C579

0.9

Compressive Strength

ASTM C579

52 MPa (7,560 psi)

Flexural Strength

ASTM C580

20 MPa (2,908 psi)

Impact Resistance @ 125 mils

MIL D3134

pass @ 125 mils

Tensile Strength

ASTM C307

9.1 MPa (1,323 psi)