Duracrete Trowel
Epoxy/Sand Mortar Mixture
09 67 00

Duracrete Trowel is a combination of Epotel TL, a 100% solids epoxy liquid resin and Duracrete Trowel Aggregate, a custom silica sand based aggregate blend to form an extremely durable, single colour, trowel applied epoxy mortar mixture.  It is designed as an industrial floor overlay and can be used as a high strength mortar to restore damage concrete or protect new concrete from high impact, abrasion, wear and mild chemicals in institutional, commercial and industrial environments.

  • Extremely durable, highly abrasion resistant
  • Seamless
  • 100% solids, VOC free resins
  • Proprietary, tightly packed, easy to apply sand mixture
  • Can be hand or power troweled
  • Moisture insensitive during application and cure
  • Will not support growth of fungus or bacteria
  • Easy to clean and to maintain
  • CFIA approved, USDA accepted

Duracrete Trowel is used to protect new concrete which will be exposed to mechanical and chemical abuse, or to resurface, level, pitch or slope existing floor slabs in industrial applications and as a high-strength concrete repair mortar. Additional features such as chemical resistance and UV resistance can be attained by applying customizable top coats.

Physical Properties

Please see Durex® Colour Selection Guide for available colour options

Resin Type

Epotel Multi-Primer

Resin Type

Epotel TL TL Aggregate

Resin Type

Epotel GSC

Resin Type

Epotel GSC


Durex® Epotel TL - 2:1 by volume

Pot Life @ 23°C

Durex® Epotel TL+ Aggregate - 20 minutes

Service Temperature Range

Min. 0°C/Max. 50°C/Quick Term 95°C

Performance Properties
Method Results
Compressive Strength @ 7 days

ASTM C 579

12,000 psi

Tensile Strength

ASTM C 307

1,100 psi

Flexural Strength

ASTM C 580

4,250 psi

Bond Strength

ACI 503R

350 psi concrete fails

Thermal Coefficient of Expansion

ASTM D 696

0.00635 mm/inch per 0°C (0.000025 in.)

Abrasion Resistance CS-17 wheel, 1 kg. load, 1000 rev.

ASTM D 4060

35-45 mg maximum weight loss

Thermal Shock Resistance

ASTM C 884


Water Absorption

ASTM C 413



ASTM D 635


Impact Resistance

MIL D-3134F

16 ft/lb concrete fractures


MIL D-3134F

No Indentation