5 m²/L (200 ft²/gal) @ 8 mils
Epotel Multi-Prime 100% Solids Epoxy Primer is a two-component, solvent-free, low-viscosity-penetrating epoxy primer for interior and exterior concrete floors. It is specially formulated as a durable, highly penetrating primer for a variety of flooring applications.
- Canadian Food Inspection Agency approved, USDA accepted.
- Zero VOCs, odourless, solvent free and non-tainting.
- 100% solids.
- Highly penetrating formula.
- Prevents off-gassing of subsequent coatings.
- Resistant to organic and inorganic chemical compounds and bacterial growth.
- May be applied at low temperatures (5 degrees C).
Epotel Multi-Prime 100% Solids Epoxy Primer is designed for use with brand epoxy, urethane and acrylic floor coatings to enhance adhesion, increase durability and extend coverage rates. It is an ideal primer for new concrete surfaces, chalky surfaces and/or surfaces which have been previously coated.
| Colour | Please see Durex® Colour Selection Guide for available colour options. | |
| Resin Type | Epoxy | |
| Coverage | 5 m²/L (200 ft²/gal) @ 8 mils | |
| Mix Ratio |
| |
| Cure Time @ 23°C (75°F) |
| |
| Pot Life - working time @ 23°C (75°F) | 30 minutes | |
| Reducer/Clean-up | or Xylene | |
| V.O.C. | 0 g/L |
| Method | Results | |
|---|---|---|
| Percent Solids | ASTM D7232 | 100% |
| Viscosity (Brookfield) 23°C (75°F) | ASTM D2196 |
|
| Specific Gravity | ASTM D333 |
|
| Compressive Strength | ASTM 695 | 10,150 psi |
| Tensile Strength | ASTM 695 | 6,860 psi |
| Bond Strength | ASTM C1583 | 217 PSI (1.5 MPa) Failure at Concrete |
| Elongation | ASTM D638 | 8.0% |
| Flexural Strength | ASTM D790 | 10,800 psi (75 MPa) |
| Abrasion Resistance | ASTM D4060 | 0.033 |
| Mar Resistance | ASTM D5178 | 1.0 kg |
| Shore D Hardness | 85 |
